Kannettavia laitteita voi usein ladata langattomasti ja parhaimmillaan latausteho voi olla jopa yli 10 wattia. LVarsinkin pieniä laitteita voi ladata myös siirtämällä sähköenergiaa NFC-linkin yli. Englantilainen Panthronics esittelee Embedded Worldissa piiriään, joka li kaksinkertaistaa nykyisen NFC-lataamisen tehokkuuden.

NFC Forumin määrityksissä (WLC-spesifikaatio) on mahdollistanut vaikkapa korvanappien lataamisen noin watin teholla. Sen sijaan Panthronicsin uusi PTX100W-ohjain mahdollistaa lataamisen yli 2,5 watin lähtöteholla.

PTX100W-piiri perustuu uuteen, patentoituun siniaaltoarkkitehtuuriin. Se tuottaa paitsi yli kaksinkertaisen lähtötehon, myös minimoi virtahävikit. Korvakuulokkeet, fitnessrannekkeet ja muut pienet laitteet voi ladata yli kaksi kertaa aiempia ratkaisuja nopeammin.

Uusimpien matkapuhelinten ja puettavien laitteiden valmistajat haluavat korvata langalliset laturiyhteydet langattomilla latauksilla mukavuuden, suunnittelun joustavuuden ja luotettavuuden etujen takia. Älypuhelimissa suosittu langaton Qi-lataus ei sovellu pienemmille laitteille, koska se vaatii suuren antennin ja kalliit piirit. Qi-antennit menettävät myös tehoaan, mikäli niitä ei ole kohdistettu tarkasti.

NFC-latauksessa antennikoko on paljon pienempi, antennin suunnalla ei ole niin väliä ja NFC-protokolla tukee suoraan datansiirtoa isäntäkoneen, kuten älypuhelimen, kanssa. Tähän asti tekniikan yleistymistä on hidastanut NFC-ohjainpiirien matala lähtöteho.

Nyt PTX100W: n esittely tekee langattoman latauksen NFC-liitännän kautta sopivaksi kaikille laitteille, joiden akku on alle 500 milliampeerituntia. Panthronicsin kehittämä arkkitehtuuri eliminoi häviölliset EMC-suodinpiirit, joita vaaditaan tavanomaisissa NFC-ohjaimissa, joissa on neliöaaltoinen lähtösignaali. Poistamalla EMC-suotimen OEM-valmistajat voivat saavuttaa antennin, jonka sovitusimpedanssi on noin kaksi kertaa pienempi kuin tavanomaisessa ratkaisussa.

Tämän ansiosta NFC -laturi voi ajaa paljon enemmän virtaa NFC-antennin kautta kuin nykyiset ohjaimet. Panthronicsin DiRAC (Direct-to-Antenna Connection) -tekniikan avulla on mahdollista tunnistaa suoraan antennisignaalit, joilla on korkea dynaaminen alue patentoidun vastaanottimen tulovaiheen kautta.

ETNtv

Watch ECF videos

Korteilla vauhtia IoT-kehitykseen

Sulautetun laitteen kehitys onnistuu useimmiten helpoiten valmiiden moduulien avulla. Nykyään niitä saa myös tehokkailla Apollo Lake -sarjan prosessoreilla varustettuna.

Lue lisää...

Suomen suurin valtti kybersodassa on luottamus

Teknologia19 – Aalto-yliopiston kyberturvallisuusprofessori Jarno Limnéll uskoo, että luotettavuudesta voi tulla suomalaisten yritysten suurin myyntivaltti tulevaisuudessa. – Tärkein kysymys on tulevaisuudessa, kehen ja mihin voimme luottaa. Luottamuksesta on tulossa hyvin arvokas aineeton pääoma yrityksille, Limnéll sanoi eilen messukeskuksessa.

Lue lisää...

LATEST NEWS

NEW PRODUCTS

 

NEWSFLASH

Ciklum, established in 2002, is a custom product engineering company with a global presence across 15 countries in 3 continents. We specialize in crafting bespoke digital solutions that push boundaries and transform industries, including full-scale IoT solutions. Whether it's cutting-edge embedded systems, data architecture or IoT, we seamlessly integrate our solutions into your existing infrastructure.

 

 

Check Point Software Technologies Ltd. is a leading provider of cyber security solutions to corporate enterprises and governments globally. Check Point Infinity’s portfolio of solutions protects enterprises and public organisations from 5th generation cyber-attacks with an industry leading catch rate of malware, ransomware and other threats.

 

 

 

AcalBfi is a leader in the development of custom technology solutions for electronic applications. Our engineers and our approach will ensure we can solve your technical challenges with custom solutions that integrate multiple technologies.

 

Analog Devices, Inc. is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world.

 

EBV Elektronik was founded in 1969 and is one of the leading specialists in European semiconductor distribution. This success is based on the underlying company philosophy, which was developed a long time ago and which still applies today: operational excellence, flexibility, reliability and execution – with the goal of achieving the highest degree of customer satisfaction. 

  

The Rohde & Schwarz technology group develops, produces and markets a wide range of electronic capital goods. With its extensive product portfolio, the company makes an important contribution to a safer and connected world. In the test & measurement, secure communications, networks & cybersecurity and broadcast & media markets, customers worldwide rely on Rohde & Schwarz and its cutting-edge solutions.

 

 

 

Mespek is an industrial electronics company. Our main product areas are embedded modules, industrial computing, test & measurement modules and server management systems (KVM-switches). Besides our domestic customers we have clients also in several countries such as Benelux, China, Estonia, Ireland, Norway, Russia, Sweden, Switzerland, et cetera..

 

We offer unique and cost-effective customized solutions based on electronic components and systems, as well as standard products from selected manufacturers. We also have own production company for electronics and cabling in Sweden. We have 90 years of experience, deep engagement, knowledge together with trustworthy and effective logistics worldwide. We are ISO 9001 and ISO 14001 certificated.

 

Richardson RFPD, an Arrow Electronics Company, is an electronic component distributor focused on RF and Wireless Communications, industrial IoT, Power Conversion and renewable energy markets. With our global reach and extensive technical capability, we serve our customers through component development and selection, technical support, and world-class logistics and supply chain capabilities. Whether designing with discrete components or looking to take advantage of integrated circuits or systems RichardsonRFPD’s worldwide design centers and technical sales team provide comprehensive support to bring your product ideas to market.

u‑blox is a global technology leader in positioning and wireless communication in automotive, industrial, and consumer markets. Their smart and reliable solutions, services and products let people, vehicles, and machines determine their precise position and communicate wirelessly over cellular and short range networks. With a broad portfolio of chips, modules, and secure data services and connectivity, u‑blox is uniquely positioned to empower its customers to develop innovative and reliable solutions for the Internet of Things, quickly and cost‑effectively.

KYOCERA AVX is a leading global manufacturer of advanced electronic components, including antennas, fuses, capacitors, filters, couplers and RF switches, engineered to accelerate technological innovation and build a better future. Supplying more than one million antennas per day, KYOCERA AVX is an industry-leading supplier of innovative antenna solutions, covering all major frequency bands and applications. KYOCERA AVX antennas utilize a wide array of materials -including LDS, stamped metal, ceramic, PCB, and FPC- to support a variety of custom and standard configurations (external indoor/outdoor, embedded on/off-board).

 

 





ECF template